1. Open the iron support (to ensure that the support is stable), place the electric iron on the support, pull the steam to the position shown in the figure, and close the steam hole;
2. Hold the iron and tilt it up 45 degrees to prevent water from flowing out when filling water. Fill the water filling port with a measuring cup to the maximum water level MAX marked on the iron;
3. Turn the temperature control knob to the "off" position, place the iron vertically, plug in the power supply, and turn the temperature control knob to the appropriate position of the ironing material, the indicator light will be on, which means the iron is heating. About 3 minutes, the indicator light will go out;
4. After the indicator light turns on again, start ironing, you can pull the steam to the position where you need steam, and adjust the amount of steam freely; if you need super steam, turn off the steam first, and then turn it off. Turn the temperature control knob to the highest level, after the indicator light goes out, press the super steam button to spray;
5. After ironing the clothes, turn the temperature control knob to off, unplug the power plug, and pour out the remaining water in the iron;
6. Put the iron in a vertical position, and put it away after the iron cools down;